If Your Hot Water System Suddenly Stops Working: What to Do

Hire A Pro

We have encountered the article relating to How to Troubleshoot and Repair an Electric Water Heater down the page on the net and felt it made good sense to share it with you on this page.


What Would Cause My Electric Water Heater to Stop Working?
Many modern residences take advantage of an electric water heater for their heater, because of its benefit as well as simplicity of use. Nevertheless, just like any other electric devices, problems might develop with its usage, unexpectedly. It can be actually irritating to get up to a cold shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the instance may be, water heater troubles can be rather stressful. Fortunately, we have actually made a listing of possible remedies to your water heater issues. There are a variety of elements that can trigger a number of these problems, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety. Whatever the problem is, getting it taken care of should not posture excessive of a concern if you comply with these actions:

Call An Expert:


If after changing all defective parts as well as resetting your temperature, the hot water heater still isn't working, you may require to get in touch with a specialist plumber for an expert point of view. The problem with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of hot water required in your home. Whatever the situation may be, an expert plumber would certainly help fix the trouble.

Check Your Power Supply:


As standard as this may seem, it is really necessary. Without ample power, your water heater will certainly not function. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, just transform it on and off once more. Replace any type of damaged or damaged fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't warm sufficient, you may need to examine the temperature level setups on your upper thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the accessibility panel as well as press the red button for temperature reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on as well as inspect if the issue has actually been settled.

Examine the Burner in the Hot Water Heater:


If it's not a power problem, then attempt having a look at your burner if it is still functioning. Evaluate each of your heating elements to make sure the issue isn't with any of them. If any of them is defective, replace that part and afterwards examine whether the warm water is back on.

Conclusion


Hot water heater issues are not constantly significant. A lot of them are because of minor issues like a blown fuse or damaged burner. Replacing the defective parts ought to work. Nevertheless, if you are still incapable to address the problem, give a call to your nearby plumber ahead to get it dealt with.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


Hot Water Heater Repair

As an avid person who reads about What Would Cause My Electric Water Heater to Stop Working?, I imagined sharing that excerpt was necessary. If you appreciated our blog posting plz don't forget to pass it around. Thanks a lot for your time spent reading it.


Estimating

Leave a Reply

Your email address will not be published. Required fields are marked *